The grinding techniques and steps of stainless steel elbow

Stainless steel elbow in the processing after forming, the first thing to be done is its polished, polished can make the surface of stainless steel elbow more bright, but also to remove some forged corners and so on.
1, polished elbow when the use of 80 mesh blinds, black relatively easy to use, apprentice suggested that the red, must be slow, can not use pressure, polished as much as possible flat grinding machine.
2, all grinded began to change the purpose of 320 blinds re-grinding wheel, 320 head wheel must be polished very meticulous, or will leave 80 mesh wheel scratches.
3,320 heads of lobes polished after grinding, gave the elbow wax, novice more points on the better.
4, and then continue to polite with kenaf wheel, then forced to press the grinding, the more force the better.
5, after grinding to remember to wax paint clean, with a little dust paint more easily Oh.
Note: Note that grinding can not be too hasty, pay attention to do not grinding to the wire
Long-term storage of stainless steel elbow, should be checked regularly, often on the exposed surface to be clean, remove dirt, cleanly stored in the indoor dry and dry place, is strictly prohibited or open storage. Often keep the stainless steel elbows dry and breathe, keep the fixtures clean and clean, and store them in accordance with the exact storage method.
Source: China Elbow Manufacturer – wilsonpipeline Pipe Industry Co., Limited (www.wilsonpipeline.com)

Categories: News