ASME/ANSI B16.5-1996 and B16.47-1996 | |||
Tolerances on flange dimensions (ASME/ANSI B16.5 and B16.7, and MSS SP-44) | |||
Dimension | Range | Tolerance | |
in | mm | ||
General and Blind Flanges(For blind flange dimendions see page 8-23 for | |||
G(raised face | ≤NPS 24 | ±0.03 | ±0.76 |
≥NPS 26,with | ±0.08 | ±2.03 | |
≥NPS 26,with | ±0.04 | ±1.02 | |
I(bolt hole diameter) | All | No tolerance in B16.5 or B 16.47 | |
J(bolt circle diameter) | All | ±0.06 | ±1.52 |
Center to center of | All | ±0.03 | ±0.76 |
Eccenticity of bolt | ≤NPS 2½ | ±0.03 | ±0.76 |
≥NPS 3 | ±0.06 | ±1.52 | |
Weld Neck Flanges1 (For dimensions see page 8-10 for B 16.5, page 8-46 for | |||
D(overall length) | ≤NPS 4 | ﹢0.06 | ﹢1.52 |
NPS 5 to 10 | ﹢0.06,﹣0.12 | ﹢1.52,﹣3.05 | |
NPS 12 to 24 | ﹢0.12,﹣0.18 | ﹢3.05,﹣4.57 | |
≥NPS 26 | ±0.19 | ±4.83 | |
Thickness of hub | All | >87.5% of pipe nominal wall thickness | |
Slip on(see page 8-17),Lap Joint(see page8-32) and Socket Welding(see page | |||
B(inside diameter,or | ≤NPS10 | ﹢0.03,﹣0.0 | ﹢0.76,﹣0.0 |
≥NPS12 | ﹢0.06,﹣0.0 | ﹢1.52,﹣0.0 | |
Threaded Flanges (see page 8-40 for dimensions): | |||
B(counterbore) | ≤NPS10 | ﹢0.03,﹣0.0 | ﹢0.76,﹣0.0 |
≥NPS12 | ﹢0.06,﹣0.0 | ﹢1.52,﹣0.0 |
Tuesday, January 4, 2022
ASME/ANSI B16.5-1996 and B16.47-1996
Related Posts:
The different orientations of pipe connection typesPipe connection is varied, the commonly used have iega profi-press, compression type and push type, welding type, and various derived connection mode.… Read More
Internal thread processing method of stamping elbowDesign and manufacture of a tapThe internal thread on the stamping elbow usually adopts tap for tapping processing. Because stainless viscosity is hig… Read More
Dimensional tolerance of erw steel pipesERW steel pipes means Electric Resistance Welded Pipes. ERW steel pipes and tubes are used. ERW steel pipes and tubes are used in various engineering … Read More
How to deal with the rough surface of stainless steel flangeFlange surface is smooth and decided the sealing surface of the connection effect, in the usual contact will have many such rough stainless steel flan… Read More
Seven advantages of stamping elbowThe seven advantages of stamping elbow:The first, light weight, stamping elbow density of 0.89 0.91 g/cm, is only one over ten of the steel pipe. And … Read More
0 comments:
Post a Comment