JIS/ANSI stainless steel cap

JIS/ANSI stainless steel cap

Sizes: 1/2 to 72 inches  Pressure: Sch10 to Sch160 and XXS  Carbon steel: A234 WPB ,WPHY-42, WPHY-46, WPHY-52, WPHY-60, WPHY-65, WPHY-70  Alloy steel: ASME A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91, and WP92  Stainless steel: ASTM A403 WP304, 304L, 316, 316L Standards: ANSI/ASME, DIN, ISO, JIS, GB, EN ,GOST Packing: wooden cases and pallets  Delivery time: according to customers’ requirement Production:90 degree elbow,45 degree elbow,180 degree elbow,equal tee,reducing tee,eccentric reducer,concentric reducer,flanges,3d bend,2d bend,5d bend,10d bend, pipe cap

JIS Unit:mm Nominal Pipe Size (NPS) Outside Diameter End to End Cap A B D E E1 Limit Wall Thick 15 20 25 32 40 ½ ¾ 1 1¼ 1½ 21.7 27.2 34.0 42.7 48.6 25.4 25.4 38.1 38.1 38.1 – – – – – – – – – – 50 65 80 90 100 2 2½ 3 3½ 4 60.5 76.3 89.1 101.6 114.3 38.1 38.1 50.8 63.5 63.5 44.5 50.8 63.5 76.2 76.2 5.5 7.0 7.6 8.1 8.6 125 150 200 250 300 5 6 8 10 12 139.8 165.2 216.3 267.4 318.5 76.2 88.9 101.6 127.0 152.4 88.9 101.6 127.0 152.4 177.8 9.5 11.0 12.7 12.7 12.7 350 400 450 500 550 600 14 16 18 20 22 24 355.6 406.4 457.2 508.0 558.8 609.6 165.1 177.8 203.2 228.6 – – 190.5 203.2 228.6 254.0 – – 12.7 12.7 12.7 12.7 – – 650 700 750 800 850 900 950 26 28 30 32 34 36 38 660.4 711.2 762.0 812.8 863.6 914.4 965.2 – – – – – – – – – – – – – – – – – – – – – 1000 1050 1100 1150 1200 40 42 44 46 48 1016.0 1066.8 1117.6 1168.4 1219.2 – – – – – – – – – – – – – – – ANSI Unit:inch Nominal Pipe Size (NPS) Outside Diameter at Bevel D End-to-End CAP Length(1) Limiting Wall thickness for length “E” Length(2) E E1 ½ ¾ 1 1¼ 1½ 0.84 1.05 1.32 1.66 1.90 1.00 1.00 1.50 1.50 1.50 0.18 0.15 0.18 0.19 0.20 1.00 1.00 1.50 1.50 1.50 2 2½ 3 3½ 4 2.38 2.88 3.50 4.00 4.50 1.50 1.50 2.00 2.50 2.50 0.22 0.28 0.30 0.32 0.34 1.75 2.00 2.50 3.00 3.00 5 6 8 10 12 5.56 6.62 8.62 10.75 12.75 3.00 3.50 4.00 5.00 6.00 0.38 0.43 0.50 0.50 0.50 3.50 4.00 5.00 6.00 7.00 14 16 18 20 22 14.00 16.00 18.00 20.00 22.00 6.50 7.00 8.00 9.00 10.00 0.50 0.50 0.50 0.50 0.50 7.50 8.00 9.00 10.00 10.00 24 26 28 30 32 24.00 26.00 28.00 30.00 32.00 10.50 10.50 10.50 10.50 10.50 0.50 – – – – 12.00 – – – – 34 36 38 40 42 34.00 36.00 38.00 40.00 42.00 10.50 10.50 12.00 12.00 12.00 – – – – – – – – – – 44 46 48 44.00 46.00 48.00 13.50 13.50 13.50 – – – – – – NOTE  (1) Length E applies for thickness not exceeding that given in column ” Limiting Wall Thickness for Length E”  (2) Length E1 applies for thickness greater than that given in column “Limiting Wall Thickness”  for NPS 24 and smaller. For NPS 26 and larger, length E1 shall be by agreement between manufacturer and purchaser.

Categories: News