Tuesday, January 4, 2022

Duplex Stainless Steel Grades Comparison Table By wilsonpipeline.com

The Duplex Stainless Steel Grades Comparison Table is intended to relate former BS, EN, German and Swedish grade designations to the current EN duplex stainless steel numbers, AISI grades and UNS (Unified Numbering System) numbers. The table is based on the ‘wrought’ ie long products (duplex stainless steel pipes etc), pipe fitting products (duplex stainless steel eccentric reducer, etc), duplex stainless steel numbers published in EN 10088 and related standards. 
Castings products use different compositions and so have their own duplex stainless steel numbers in EN 10283. The related castings grades in both EN 10283 and BS 3100 are included in the table.

The ‘Chemical Composition’ is intended to represent the composition only. This does not show the specified or typical composition of commercially available duplex stainless steels. Specified ranges for the wrought European grades can be found in either the EN 10088-2 or EN10088-3 tables. None of the duplex stainless steels listed were included in either BS 970 or BS 1449. The castings grades specified ranges can be found in the EN 10283 or BS 3100 tables.

These are comparisons only and cannot be assumed to be direct equivalent grades. The data given is not intended to replace that shown in inpidual standards to which reference should always be made.

Duplex Stainless Steel Grades table

EN 10088Common NamesBS WroughtAISIUNSEnGerman DINSSEN 10283BS CastChemical Composition
..........CCrNiMoOthers
1.4162LDX 2101S321010.030x21.51.50.35Mn
1.4362SAF2304/UR35NS32304X2CrNiN23-423270.030x2240.40.4Cu
1.4410SAF2507
/UR47N/F53
S3275023281.44680.030x2463
1.4460453S329S32900X4CrNiMoN27-5-223240.05x2551.5
1.4462SAF2205/Falc223
/UR45N/F51
318S13S31803 S32205X2CrNiMoN22-5-323771.4470332C150.030x2253
1.4501Zeron 100/F55S327601.44170.030x24630.5W
1.4507Ferralium 255
/UR52N/F61
S325500.030x24631Cu

Note Chemical composition figures are intended to be representative of the grade, not typical. ‘x’ indicates a maximum

Source: wilsonpipeline Pipe Industry Co., Limited (www.wilsonpipeline.com)

Related Posts:

  • Alloy 20 (UNS N08020)Alloy 20 (UNS N08020) is a nickel-iron-chromium austenitic alloy developed for maximum resistance to acid attack, particularly sulfuric acid. This sup… Read More
  • Stainless Steel Grade 321 (UNS S32100)Chemical FormulaFe, 0.08% C, 17-19% Cr, 9-12% Ni, 2% Mn, 1% Si, 0.3-0.7% Ti, 0.045% P, 0.03% SBackgroundGrade 321 and 347 include the basic austenitic… Read More
  • Nickel GradesNickel alloys are used extensively because of their corrosion resistance, high temperature strength and their special magnetic and thermal expansion p… Read More
  • Inconel 625 (UNS N06625)Inconel 625 (UNS N06625) is an oxidation and corrosion resistant alloy wilsonpipeline supplies in flanges, bar, pipe, tubes, gaskets, and pipe fitting… Read More
  • Stainless Steel Grade A286 (UNS S66286)Stainless steel A286 is a heat and corrosion resistant austenitic iron-base material that may be age hardened to some high strength level. It is made … Read More

0 comments:

Post a Comment