Tuesday, January 4, 2022

Copper Nickel Alloy 90/10(UNS C70600)

Copper nickel alloys are alloys that have moderate strength and thermal stability in high temperature levels. The high oxidation resistance of these alloys is visible in moist air and steam. Copper nickel alloys have 2 to 30% nickel, high oxidation resistance and stress corrosion cracking resistance.

Copper nickel alloys have good fabricability and high inherent resistance to biofouling. The addition of manganese, niobium, iron and or chromium in these alloys improves their corrosion resistance and strength.

Nickel is soluble in copper and this renders the copper nickel alloys as single phase alpha structures. The cast structures have alpha dendrites that contain huge quantities of nickel. The dendrite structure is broken by mechanical treatments. However, the alloying elements do not become homogenized even by repeated thermal and mechanical treatments.

Copper nickel alloys are of two types that include 90/10 and 70/30. The 90/10 alloys are widely used as they are inexpensive. The 90/10 copper nickel alloys have great resistance to sea water corrosion due to the presence of significant amounts of manganese and iron.

Copper nickel alloys are used in the following applications:

  • Hydraulic lines
  • Fish cages for aquaculture
  • Heat exchangers and condensers
  • Desalination units
  • Sea water pipework
  • Tubes for power plants and ships
  • Offshore fire water systems
  • Copper Nickel Alloy 90/10 UNS C70600 flange
  • Pumps, valves, sheathing and fittings for ship hulls

The following datasheet will provide details about UNS C70600 copper nickel alloys.

Chemical Composition

The chemical composition of UNS C70600 copper nickel alloys is outlined in the following table.

ElementContent (%)
Cu88.7
Fe1.3
Ni10.0

Physical Properties

The following table shows the physical properties of UNS C70600 copper nickel alloys.

PropertiesMetricImperial
Density8.94 g/cm30.323 lb/in3

Mechanical Properties

The mechanical properties of UNS C70600 copper nickel alloys are displayed in the following table.

PropertiesMetricImperial
Tensile strength, ultimate303-414 MPa43900-60000 psi
Tensile strength, yield (depending on temper)110-393 MPa16000-57000 psi
Elongation at break (in 254 mm)42.00%42.00%
Machinability (UNS C36000 (free-cutting brass) = 100%)20%20%
Shear modulus52.0 GPa7540 ksi
Poisson’s ratio0.340.34
Elastic modulus140 GPa20300 ksi

Other Designations

Equivalent materials to UNS C70600 copper nickel alloys are:

ASME SB111ASTM B111ASTM B466ASME SB171
ASME SB359ASTM B122ASTM B469MIL T-22214
ASME SB395ASTM B151ASTM B543SAE J461
ASME SB466ASTM B171ASTM B608SAE J463
ASME SB467ASTM B359DIN 2.0872MIL T-16420
ASME SB543ASTM B395MIL C-15726MIL T-15005
ASTM B432

Fabrication and Heat Treatment

Annealing

UNS C70600 copper nickel alloys are annealed at temperatures between 593 and 816°C (1100 and 1500°F)

Cold Working

UNS C70600 copper nickel alloys have good cold working capacity.

Hot Working

Copper nickel 90/10 alloys have good hot forming capacity.

Welding

Copper nickel 90/10 alloys can be welded using gas shielded arc welding, spot welding, coated metal arc welding, butt welding, oxyacetylene welding, brazing, soldering and seam welding processes.

Forging

Temperatures between 843 and 954°C (1550 and 1750°F) are suitable for the forging of 90/10 copper nickel alloys.

Machinability

The machinability rating of copper nickel 90/10 alloys is 20%.

Applications

UNS C70600 copper nickel alloys are used in areas where stainless steel cannot be used due to chloride stress-corrosion cracking and in other parts requiring high levels of corrosion resistance. These alloys are also used as machined and forged valve and pump parts that are utilized for seawater services.

For more information on this source, please visit wilsonpipeline Pipe Industry.

Related Posts:

  • Straight TeesStraight TeesA Straight Tee means a tee of pipe fitting which the branch outlet has a 90 degree direction turning from the main pipe of the tee. Commo… Read More
  • How to process the inner thread of the stainless steel pipe fittingsWhether it is stainless steel welded pipe fittings or stainless steel seamless pipe fittings have internal thread, this kind of internal thread is how… Read More
  • Reducing TeeA Reducing Tee is also called “unequal tee“, which means the tee branch pipe diameter is not same with the run pipe of the tee. Commonly, in a reducin… Read More
  • Stainless Steel 90º ElbowStainless Steel 90º ElbowA stainless steel 90º elbow is a pipe fitting which you can used to change the flow direction in a stainless steel 90º elbow … Read More
  • Stainless Steel 180º ElbowStainless Steel 180º Elbowstainless steel 180º elbow is like 45º or 90º elbow, but the flow direction change is 180 degree. It looks like the flow flu… Read More

0 comments:

Post a Comment